Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 24 5410 All-in-One Service Manual

Removing the base panel

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the stand.
  3. Remove the back cover.
  4. Remove the I/O cover.
  5. Remove the hard drive.
  6. Remove the system-board shield.
  7. Remove the speakers.
  8. Remove the fan.
  9. Remove the coin-cell battery.
  10. Remove the retractable-camera assembly.
  11. Remove the memory module.
  12. Remove the wireless card.
  13. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable.
  14. Remove the heat sink.
  15. Remove the media-card reader.
  16. Remove the system board.
  17. Remove the microphones.
  18. Remove the display hinges.
  19. Remove the power-button board.
  20. Remove the antennas.
  21. Remove the display panel.

About this task

The following image indicates the location of the base panel and provides a visual representation of the removal procedure.

Image: Removing the base panel

Image: Removing the base panel

Steps

  1. Remove the 13 screws (M3x5) that secure the base panel to the display-assembly base.
  2. Place the base panel in an upright position.
  3. Remove the base panel and lift the base panel off the display-assembly base.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\