Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 24 5410 All-in-One Service Manual

PDF

Installing the power-button board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the power-button board and provides a visual representation of the installation procedure.

Image: Installing the power-button board

Steps

  1. Connect the power-button board cable to the power-button board and close the latch to secure the cable.
  2. Using the alignment tabs as reference, align and place the power-button board in the slot on the display-assembly base.
  3. Replace the screw (M3x5) that secures the power-button board to the display-assembly base.
  4. Adhere the tape that secures the power-button cable to the power-button board.
  5. Replace the five screws (M3x5) that secure the left display hinge to the display-assembly base.

Next steps

  1. Install the system-board shield.
  2. Install the I/O cover.
  3. Install the back cover.
  4. Install the stand.
  5. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\