PowerScale OneFS 9.8.0.0 Backup and Recovery Guide

Inventory a robot

Before you create a NetBackup policy, you must inventory a robot with NetBackup and associate it with a volume pool.

1. In the NetBackup Administration Console, expand Media and Device Management.
2. Inventory a robot.
   1. Expand Devices.
   2. Click Robots.
   3. Right-click the name of the robot that was added when you configured storage devices, and then click Inventory Robot.
3. Associate a volume pool with the robot.
   1. Click Update volume configuration.
   2. Click Advanced Options.
   3. From the Volume Pool list, select the volume pool you created previously.
   4. Click Start.
   5. Click Yes.
   6. Click Close.
4. Optional: To verify that the robot has been inventoried successfully, click the name of the media pool you created, and ensure that all media are displayed in the table.