Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

OptiPlex 3000 Thin Client Service Manual

PDF

Installing the optional Type-C module

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the optional Type-C module and provides a visual representation of the installation procedure.

To identify the ports and connectors, see the system board connectors.

Image: Installing the optional Type-C module

Steps

  1. Insert and push the flat-head screwdriver into the slot on the optional module filler to release the optional module filler from the chassis.
    NOTE:Step one is only applicable for new installation or component upgrade. For replacing an existing component, follow the procedure from step two.
  2. Connect the Type-C cable and the DisplayPort cable to the connectors on the system board.
  3. Align and place the Type-C module into the optional I/O module slot on the chassis.
  4. Rotate and slide the Type-C module.
  5. Replace the two screws (M3x3) to secure the Type-C module to the chassis.

Next steps

  1. Install the side cover.
  2. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\