Siirry pääsisältöön
Kirjaudu ulos

Tervetuloa Dellin asiakkaaksi

Oma tili
  • Tee tilauksia nopeasti ja helposti
  • Tarkastele tilauksia ja seuraa lähetyksen tilaa
  • Luo tuoteluettelo ja käytä sitä
  • Hallitse Dell EMC-sivustoja, tuotteita ja tuote-tason yhteystietoja yrityksen hallinnan avulla.
Kirjaudu sisään Luo tili Premier-kirjautuminen Kumppaniohjelman sisäänkirjautumissivu
Ota yhteyttä

OpenManage Integration for VMware vCenter Version 4.0 Web Client User's Guide

PDF

Extracting Thumbprint by using the command line

You can see the following sections for extracting thumbprint by using the command line on the appliance and Windows installation.

Extracting thumbprint by using the Command Line on the vCenter server appliance

Perform the following steps:

  1. Move or upload the old_machine.crt certificate to PSC in the C:\certificates\old_machine.crt location that is created in step 1 of retrieving the old certificate procedure. You can use Windows Secure Copy (WinSCP) or another SCP client to move or upload the certificate.
  2. Log in to the External Platform Services Controller appliance through Secure Shell (SSH).
  3. Run the following command to enable accessing the Bash shell: shell.set --enabled true.
  4. Type shell and press Enter.
  5. Run the following command to extract the thumbprint: openssl x509 -in /certificates/old_machine.crt -noout -sha1 –fingerprint
NOTE: The thumbprint appears as a sequence of numbers and letters after the equal sign, which is as follows: SHA1 Fingerprint= ea:87:e1:50:bb:96:fb:be:1f:a9:5a:3c:1d:75:b4:8c:30:db:79:71

Extracting thumbprint by using the Command Line on Windows installation

Perform the following steps:

  1. Move or upload the old_machine.crt certificate to PSC in the C:\certificates\old_machine.crt location that is created in step 1 of retrieving the old certificate procedure. You can use Windows Secure Copy (WinSCP) or another SCP client to move or upload the certificate.
  2. Connect to External Platform Services Controller through remote desktop connection.
  3. Open command prompt in administrative mode.
  4. Run the following command to extract the thumbprint: "%VMWARE_OPENSSL_BIN%" x509 -in c:\certificates\old_machine.crt -noout -sha1 –fingerprint
NOTE: The thumbprint appears as a sequence of numbers and letters after the equal sign, which is as follows: SHA1 Fingerprint=09:0A:B7:53:7C:D9:D2:35:1B:4D:6D:B8:37:77:E8:2E:48:CD:12:1B
Run the ls_update_certs.py with the old thumbprint. Log out and log in to the vCenter Web client after the services are updated successfully. The Dell plug-in launches successfully.

Arvostele tämä sisältö

Tarkka
Hyödyllinen
Helppo hahmottaa
Oliko tästä artikkelista hyötyä?
0/3000 characters
  Anna arvioinnit (1–5 tähteä).
  Anna arvioinnit (1–5 tähteä).
  Anna arvioinnit (1–5 tähteä).
  Valitse, oliko artikkelista mielestäsi hyötyä vai ei.
  Kommenteissa ei voi olla seuraavia erikoismerkkejä: <>()\