Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip access-list standard

Create a standard IP access list (IP ACL) to filter based on IP address.

Syntax

ip access-list standard access-list-name

Parameters

access-list-name

Enter a string up to 140 characters long as the ACL name.

Defaults

All IP access lists contain an implicit deny any, that is, if no match occurs, the packet is dropped.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The Dell operating system supports one ingress and one egress IP ACL per interface.

The number of entries allowed per ACL is hardware-dependent. For detailed specifications on entries allowed per ACL, refer to your line card documentation.

Example

Dell(conf)#ip access-list standard TestList
                                             Dell(config-std-nacl)#

Related Commands

ip access-list extended — creates an extended access list.

resequence access-list — Displays the current configuration.