Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip bgp

View the current BGP IPv4 routing table for the system.

Syntax

show ip bgp [ ipv4 unicast] [network [ network-mask] [longer-prefixes]]

Parameters

ipv4 unicast	(OPTIONAL) Enter the keywords `ipv4 unicast` to view information only related to ipv4 unicast routes.
network	(OPTIONAL) Enter the network address (in dotted decimal format) of the BGP network to view information only on that network.
network-mask	(OPTIONAL) Enter the network mask (in slash prefix format) of the BGP network address.
longer-prefixes	(OPTIONAL) Enter the keywords `longer-prefixes` to view all routes with a common prefix.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

When you enable the bgp non-deterministic-med command, the show ip bgp command output for a BGP route does not list the INACTIVE reason.

The following describes the show ip bgp command shown in the following example.

Field	Description
Network	Displays the destination network prefix of each BGP route.
Next Hop	Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table.
Metric	Displays the BGP route’s metric, if assigned.
LocPrf	Displays the BGP LOCAL_PREF attribute for the route.
Weight	Displays the route’s weight.
Path	Lists all the ASs the route passed through to reach the destination network.

Example

Dell>show ip bgp
                                             BGP table version is 847562, local router ID is 63.114.8.131
                                             Status codes: s suppressed, d damped, h history, * valid, > best
                                             Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
                                             Origin codes: i - IGP, e - EGP, ? - incomplete
                                             
                                             Network         Next Hop   Metric LocPrf Weight Path
                                             *>  0.0.0.0/0      63.114.8.33                  0 18508 i
                                             *   3.0.0.0/8      63.114.8.33                  0 18508 209 701 80 i
                                             *>                 63.114.8.33                  0 18508 701 80 i
                                             *>  3.3.0.0/16     0.0.0.0        22        32768 ?
                                             63.114.8.35                  0 18508 ?
                                             *>  4.0.0.0/8      63.114.8.33                  0 18508 701 1 i
                                             *>  4.2.49.12/30   63.114.8.33                  0 18508 209 i
                                             *   4.17.250.0/24  63.114.8.33                  0 18508 209 1239 13716 i
                                             *>  63.114.8.33                                 0 18508 701 1239 13716 i
                                             *   4.21.132.0/23  63.114.8.33                  0 18508 209 6461 16422 i
                                             *>                 63.114.8.33                  0 18508 701 6461 16422 i
                                             *>  4.24.118.16/30 63.114.8.33                  0 18508 209 i
                                             *>  4.24.145.0/30  63.114.8.33                  0 18508 209 i
                                             *>  4.24.187.12/30 63.114.8.33                  0 18508 209 i
                                             *>  4.24.202.0/30  63.114.8.33                  0 18508 209 i
                                             *>  4.25.88.0/30   63.114.8.33                  0 18508 209 3561 3908 i
                                             *>  5.0.0.0/9      63.114.8.33     0            0 18508 ?
                                             *>  5.0.0.0/10     63.114.8.33     0            0 18508 ?
                                             *>  5.0.0.0/11     63.114.8.33     0            0 18508 ?
                                             --More--

Related Commands

show ip bgp community — views the BGP communities.

neighbor maximum-prefix — controls the number of network prefixes received.