Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

qos-policy-input

Create a QoS input policy on the router.

Syntax

qos-policy-input qos-policy-name [layer2]

To remove an existing input QoS policy from the router, use the no qos-policy-input qos-policy-name [layer2] command.

Parameters

qos-policy-name	Enter the name for the policy map in character format (32 characters maximum).
layer2	(OPTIONAL) Enter the keyword `layer2` to specify a Layer 2 Class Map. The default is Layer 3.

Defaults

Layer 3

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To specify the name of the input QoS policy, use this command. After the input policy is specified, rate-police is defined. This command enables Qos-Policy-Input Configuration mode — (conf-qos-policy-in).

When changing a Service-Queue configuration in a QoS policy map, all QoS rules are deleted and re-added automatically to ensure that the order of the rules is maintained. As a result, the Matched Packets value shown in the show qos statistics command is reset.

Related Commands

rate police — incoming traffic policing function.