Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

service-policy input

Apply an input policy map to the selected interface.

Syntax

service-policy input policy-map-name [layer2]

To remove the input policy map from the interface, use the no service-policy input policy-map-name [layer2] command.

Parameters

policy-map-name	Enter the name for the policy map in character format (16 characters maximum). You can identify an existing policy map or name one that does not yet exist.
layer2	(OPTIONAL) Enter the keyword `layer2` to specify a Layer 2 Class Map. The default is Layer 3.

Defaults

Layer 3

Command Modes

INTERFACE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the M I/O Aggregator.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

You can attach a single policy-map to one or more interfaces to specify the service-policy for those interfaces. A policy map attached to an interface can be modified.

NOTE: The service-policy commands are not allowed on a port channel. The service-policy input policy-map-name command and the service-class dynamic dot1p command are not allowed simultaneously on an interface.

Related Commands

policy-map-input — creates an input policy map.