Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip domain-lookup

To address resolution (that is, DNS), enable dynamic host-name.

Syntax

ip domain-lookup

To disable DNS lookup, use the no ip domain-lookup command.

Defaults

Disabled.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To fully enable DNS, also specify one or more domain name servers with the ip name-server command.

The Dell Networking OS does not support sending DNS queries over a VLAN. DNS queries are sent out all other interfaces, including the Management port.

To view current bindings, use the show hosts command.

Related Commands

ip name-server — specifies a DNS server.

show hosts — Views the current bindings.