Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

rmon event

Add an event in the RMON event table.

Syntax

rmon event number [log] [trap community] [description string] [owner name]

To disable RMON on an interface, use the no rmon event number command.

Parameters

number	Assign an event number in integer format from 1 to 65535. The number value must be unique in the RMON event table.
log	(OPTIONAL) Enter the keyword `log` to generate an RMON log entry. The log entry is triggered and sets the eventType in the RMON MIB to log or log-and-trap. The default is No log.
trap community	(OPTIONAL) Enter the keyword `trap` then an SNMP community string to configure the eventType setting in the RMON MIB. This keyword sets either snmp-trap or log-and-trap. The default is public.
description string	(OPTIONAL) Enter the keyword `description` then a string describing the event.
owner name	(OPTIONAL) Enter the keyword `owner` then the name of the owner of this event.

Defaults

As noted in the Parameters section.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.