Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip domain-name

Configure one domain name for the switch.

Syntax

ip domain-name name

To remove the domain name, use the no ip domain-name command.

Parameters

name

Enter one domain name to be used to complete unqualified names (that is, incomplete domain names that cannot be resolved).

Defaults

Not configured.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

You can only configure one domain name with the ip domain-name command. To configure more than one domain name, configure the ip domain-list command up to six times.

To enable dynamic resolution of hosts, use the following steps:

specify a domain name server with the ip name-server command
enable DNS with the ip domain-lookup command

To view current bindings, use the show hosts command.

Related Commands

ip domain-list — configures additional names.