Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

snmp trap link-status

Enable the interface to send SNMP link traps, which indicate whether the interface is up or down.

Syntax

snmp trap link-status

To disable sending link trap messages, use the no snmp trap link-status command.

Defaults

Enabled.

Command Modes

INTERFACE

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

If the interface is expected to flap during normal usage, you could disable this command.