Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip traffic

View IP, ICMP, UDP, TCP and ARP traffic statistics.

Syntax show ip traffic
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show ip traffic summary shown in the following example.
Keyword Definition
unknown protocol... No receiver for these packets. Counts packets whose protocol type field is not recognized by the system.
not a gateway... Packets can not be routed; the host/network is unreachable.
security failures... Counts the number of received unicast/multicast packets that could not be forwarded due to:
  • route not found for unicast/multicast; ingress interfaces do not belong to the destination multicast group
  • destination IP address belongs to reserved prefixes; the host/network is unreachable
bad options... Unrecognized IP option on a received packet.
Frags: IP fragments received.
... reassembled Number of IP fragments that were reassembled.
... timeouts Number of times a timer expired on a reassembled queue.
... too big Number of invalid IP fragments received.
... couldn’t fragment Number of packets that could not be fragmented and forwarded.
...encapsulation failed Counts packets which could not be forwarded due to ARP resolution failure. The system sends an arp request prior to forwarding an IP packet. If a reply is not received, the system repeats the request three times. These packets are counted in encapsulation failed.
Rcvd:
...short packets The number of bytes in the packet are too small.
...bad length The length of the packet was not correct.
...no port broadcasts The incoming broadcast/multicast packet did not have any listener.
...socket full The applications buffer is full and the incoming packet are dropped.
The F10 Monitoring MIB provides access to the following statistics.
  • IP Statistics: Bcast: Received: Object = f10BcastPktRecv, OIDs = 1.3.6.1.4.1.6027.3.3.5.1.1
  • IP Statistics: Bcast: Sent: Object = f10BcastPktSent, OIDs = 1.3.6.1.4.1.6027.3.3.5.1.2
  • IP Statistics: Mcast: Received: Object = f10McastPktRecv, OIDs = 1.3.6.1.4.1.6027.3.3.5.1.3
  • IP Statistics: Mcast: Sent: Object = f10McastPktSent, OIDs = 1.3.6.1.4.1.6027.3.3.5.1.4
  • ARP Statistics: Rcvd: Request: Object = f10ArpReqRecv, OIDs = 1.3.6.1.4.1.6027.3.3.5.2.1
  • ARP Statistics: Rcvd: Replies: Object = f10ArpReplyRecv, OIDs = 1.3.6.1.4.1.6027.3.3.5.2.3
  • ARP Statistics: Sent: Request: Object = f10ArpReqSent, OIDs = 1.3.6.1.4.1.6027.3.3.5.2.2
  • ARP Statistics: Sent: Replies: Object = f10ArpReplySent, OIDs = 1.3.6.1.4.1.6027.3.3.5.2.4
  • ARP Statistics: Sent: Proxy: Object = f10ArpProxySent, OIDs = 1.3.6.1.4.1.6027.3.3.5.2.5
Example
Dell#show ip traffic
                                             IP statistics:
                                             Rcvd: 10021161 total, 3197480 local destination
                                             2501 format errors, 390 checksum errors, 0 bad hop count
                                             0 unknown protocol, 0 not a gateway
                                             115 security failures, 0 bad options
                                             Frags: 0 reassembled, 0 timeouts, 0 too big
                                             0 fragmented, 0 couldn't fragment
                                             Bcast: 6281 received, 0 sent; Mcast: 500 received, 0 sent
                                             Sent: 6573260 generated, 0 forwarded
                                             3830 encapsulation failed, 0 no route
                                             
                                             ICMP statistics:
                                             Rcvd: 0 format errors, 0 checksum errors, 0 redirects, 3 unreachable
                                             0 echo, 0 echo reply, 0 mask requests, 0 mask replies, 0 quench
                                             0 parameter, 0 timestamp, 0 info request, 0 other
                                             Sent: 0 redirects, 1 unreachable, 0 echo, 0 echo reply
                                             0 mask requests, 0 mask replies, 0 quench, 0 timestamp
                                             0 info reply, 0 time exceeded, 0 parameter problem
                                             
                                             UDP statistics:
                                             Rcvd: 2938110 total, 14 checksum errors, 1 no port
                                             0 short packets, 0 bad length, 1883908 no port broadcasts, 0 socket full
                                             Sent: 329731 total, 1883908 forwarded broadcasts
                                             --More--
                                          

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"