iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

PDF

DellNIC

Description

An instance of DellNIC will have NIC device specific data.

URL

/redfish/v1/Dell/Systems/<ComputerSystem-Id>/NetworkDeviceFunctions/DellNIC/<DellNIC-ID>

Supported HTTP Method and Privileges


HTTP Method	Required Privilege
GET	Login

Table 1. Supported properties— DellNICThis table provides details about the HTTP supported properties for the resource.
Property	Type	Read Only	Description
BusNumber	integer	Yes	The bus number where this PCI device resides.
CableLengthMetres	integer	Yes	This property represents the cable length of Small Form Factor pluggable(SFP) Transceiver.
ControllerBIOSVersion	string	Yes	This property represents the firmware version of Controller BIOS.
DataBusWidth	string	Yes	This property represents the data-bus width of the NIC PCI device.
DeviceDescription	string	Yes	A string that contains the friendly Fully Qualified Device Description (FQDD), which is a property that describes the device and its location.
EFIVersion	string	Yes	This property represents the firmware version of EFI.
FQDD	string	Yes	A string that contains the Fully Qualified Device Description (FQDD), which is a user-friendly name for the object.
FamilyVersion	string	Yes	Represents family version of firmware.
IdentifierType	string	Yes	This property represents the type of Small Form Factor pluggable(SFP) Transceiver.
InstanceID	string	Yes	A unique identifier for the instance.
LastSystemInventoryTime	string	Yes	This property represents the time when System Inventory Collection On Reboot (CSIOR) was last performed or the object was last updated on iDRAC. The value is represented in the format yyyymmddHHMMSS.
LastUpdateTime	string	Yes	This property represents the time when the data was last updated. The value is represented in the format yyyymmddHHMMSS.
LinkDuplex	string	Yes	This property indicates whether the Link is full-duplex or half-duplex.
MediaType	string	Yes	The property shall represent the drive media type.
NicMode	string	Yes	Represents if network interface card personality is enabled or disabled on current partition in a Converged Network Adaptor device.
PCIDeviceID	string	Yes	This property contains a value assigned by the device manufacturer used to identify the type of device.
PCISubDeviceID	string	Yes	Represents PCI sub device ID.
PCISubVendorID	string	Yes	This property represents the subsystem vendor ID. ID information is reported from a PCIDevice through protocol-specific requests.
PCIVendorID	string	Yes	This property represents the register that contains a value assigned by the PCI SIG used to identify the manufacturer of the device.
PartNumber	string	Yes	The part number assigned by the organization that is responsible for producing or manufacturing the Small Form Factor pluggable(SFP) Transceivers.
PermanentFCOEMACAddress	string	Yes	PermanentFCOEMACAddress defines the network address that is hardcoded into a port for FCoE.
PermanentiSCSIMACAddress	string	Yes	PermanentAddress defines the network address that is hardcoded into a port for iSCSI. This 'hardcoded' address can be changed using a firmware upgrade or a software configuration. When this change is made, the field should be updated at the same time. PermanentAddress should be left blank if no 'hardcoded' address exists for the NetworkAdapter.
ProductName	string	Yes	A string containing the product name.
Protocol	string	Yes	Supported Protocol Types.
Revision	string	Yes	This property represents the revision number of the Small Form Factor pluggable(SFP) Transceiver.
SerialNumber	string	Yes	A manufacturer-allocated number used to identify the Small Form Factor pluggable(SFP) Transceiver.
SlotLength	string	Yes	This property represents the represents the slot length of the NIC PCI device.
SlotType	string	Yes	This property indicates the slot type of the NIC PCI device.
VendorName	string	Yes	This property represents the vendor name.
iScsiOffloadMode	string	Yes	This property indicates if Internet Small Computer System Interface (iSCSI) personality is enabled or disabled on current partition in a Converged Network Adaptor device.

Table 2. Status codes
HTTP status code
200
404