iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

Supported Action — ReInitiateDHS

The ReInitiateDHS action is used for reinitiating the provisioning server discovery and handshake.

/redfish/v1/Dell/Managers/iDRAC.Embedded.1/DellLCService/Actions/DellLCService.ReInitiateDHS


HTTP Method	Required Privilege
POST	Login


Parameter	Type	Value	Description
PerformAutoDiscovery	ENUM	Off, Now, NextBoot	A value of "Off = 1" disables auto discovery. A value of "Now = 2" enables and initiates auto discovery immediately. A value of "NextBoot = 3" delays reconfiguration and auto discovery until next AC powercycle. Note—If NextBoot has a value of 3 then after successful execution, the Discovery Factory Defaults attribute is set to "On".
ProvisioningServer	String		This property specifies the provisioning server addresses and ports used for auto discovery. If omitted, Lifecycle Controller gets the value from DHCP or DNS.
ResetToFactoryDefaults	Boolean		If ResetToFactoryDefaults is True, all configuration information is replaced with auto-discovery factory default properties. If False, an error is returned.


HTTP Status Code	Extended Information	Error Message Code
200
400	<null>	LC002, LC004, LC008, LC009