iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

PDF

DellNumericSensor

Description

An instance of DellNumericSensor will have data specific to sensor devices that returns only numeric readings and optionally supports thresholds settings.

URL

/redfish/v1/Dell/Systems/<ComputerSystem-Id>/DellNumericSensor/<Sensor-ID>

Supported HTTP Method and Privileges


HTTP Method	Required Privilege
GET	Login
PATCH	ConfigureManager, Login

Supported Properties


Property	Type	Read Only	Description
CurrentReading	integer	Yes	The current value indicated by the Sensor. The property value shall be in units specified by the BaseUnit property value multiplied by 10 to the power of the UnitModier property value.
CurrentState	string	Yes	The current state indicated by the Sensor. This value is always one of the "PossibleStates".
DeviceID	string	Yes	An address or other identifying information to uniquely name the LogicalDevice.
ElementName	string	Yes	The user-friendly name for the class instance.This value does not have to be unique within its namespace.
EnabledDefault	string	Yes	An enumerated value that indicates an administrator's default or startup configuration for the Enabled State of an element. By default, the element is "Enabled" (value=2).
EnabledState	string	Yes	EnabledState is an integer enumeration that indicates the enabled and disabled states of an element.
HealthState	string	Yes	Indicates the current health of the element.
Links	string	Yes	Contains references to other resources that are related to this resource.
LowerThresholdCritical	integer	Yes	The threshold values of the sensor specify the ranges (minimum and maximum values) for determining whether the Sensor is operating under Normal, NonCritical, or Critical conditions. If the CurrentReading is below LowerThresholdCritical, the CurrentState is Critical.
LowerThresholdNonCritical	integer	No	The threshold values of the sensor specify the ranges (minimum and maximum values) for determining whether the Sensor is operating under Normal, NonCritical, or Critical conditions. If Current Reading is between LowerThresholdNonCritical and Upper ThresholdNonCritical, the Sensor is reporting a normal value. If CurrentReading is between LowerThresholdNonCritical and LowerThresholdCritical, the CurrentState is NonCritical.
OperationalStatus	array	Yes	Indicates the operational status of the represented resource.
OtherSensorTypeDescription	string	Yes	A string that describes the sensor type. This property is used when the SensorType property is set to "Other".
PossibleStates	array	Yes	PossibleStates enumerates the string outputs of the Sensor.
PrimaryStatus	string	Yes	PrimaryStatus provides a high-level status value, intended to align with Red-Yellow-Green type representation of status.
RateUnits	string	Yes	Specifies if the units returned by this sensor are rate units. All the values returned by this Sensor are represented in the units obtained by (BaseUnits * 10 raised to the power of the UnitModifier). This is true unless this property (RateUnits) has a value other than "None".
ReadingUnits	string	Yes	The base unit of the values returned by this Sensor.
RequestedState	string	Yes	RequestedState is an integer enumeration that indicates the last requested or desired state for the element, irrespective of the mechanism through which it was requested.
SensorType	string	Yes	The Type of the Sensor, e.g. Voltage or Temperature Sensor. If the type is set to "Other", then the OtherSensorType Description can be used to further identify the type, or if the Sensor has numeric readings, then the type of the Sensor can be implicitly determined by the Units.
SystemName	string	Yes	The Name of the scoping System.
UnitModifier	integer	Yes	This property represents the unit multiplier for the values returned by this sensor.
UpperThresholdCritical	integer	Yes	The threshold values of the sensor specify the ranges (minimum and maximum values) for determining whether the Sensor is operating under Normal, NonCritical, or Critical conditions.
UpperThresholdNonCritical	integer	No	The threshold values of the sensor specify the ranges (minimum and maximum values) for determining whether the Sensor is operating under Normal, NonCritical, or Critical conditions.
ValueFormulation	object	Yes	This property has the value 2 (Measured).

Table 1. Status codes
HTTP status code
200
404