iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

SerialInterface

The SerialInterface schema describes an asynchronous serial interface, such as an RS-232 interface, available to a system or device.

/redfish/v1/Managers/<Manager-Id>/SerialInterfaces/<Serial-key>


Property	Type	Read Only	Description
BitRate	String	No	The receive and transmit rate of data flow, typically in bits-per-second (bps), over the serial connection.
ConnectorType	String	Yes	The type of connector used for this interface.
DataBits	String	No	The number of data bits that follow the start bit over the serial connection.
FlowControl	String	No	The type of flow control, if any, that is imposed on the serial connection.
InterfaceEnabled	Boolean	No	An indication of whether this interface is enabled.
Parity	String	No	The type of parity used by the sender and receiver to detect errors over the serial connection.
PinOut	String	Yes	The physical pinout configuration for a serial connector.
SignalType	String	Yes	The type of signal used for the communication connection.
StopBits	String	No	The period of time before the next start bit is transmitted.