iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

Supported Action — DeleteJobQueue

Description

The DeleteJobQueue action is used for deleting jobs from the JobQueue or the job store. To clear all the jobs, use the keyword JID_CLEARALL for the JobID. Successful execution of this method with the JID_CLEARALL parameter value also clears all the pending attribute values. When the number of jobs in the JobQueue reaches the maximum limit, jobs in the Completed state are deleted automatically.

NOTE On the older PowerEdge systems, jobs in the Failed state are not deleted automatically and must be removed manually one at a time, or all together using the keyword JID_CLEARALL.

URL

/redfish/v1/Dell/Managers/<Manager-Id>/DellJobService/Actions/DellJobService.DeleteJobQueue

Supported HTTP Method and Privileges


HTTP Method	Required Privilege
POST	ConfigureComponents, Login

Supported Parameters

NOTE A star (*) indicates a required parameter, else the parameter is optional.


Parameter	Type	Value	Description
JobID	String		The JobID parameter specifies the job to be deleted. The value "JID_CLEARALL" for the JobID clears all the jobs.

Supported Status Codes


HTTP Status Code	Extended Information	Error Message Code
200	Base.1.0.Success	SUP020
400	Base.1.0.PropertyMissing	JCP013
400	<null>	JCP012, JCP015, SUP011

Welcome

Welcome to Dell