iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

Supported Action — SupportAssistSetAutoCollectSchedule

This method is used for auto-scheduling the collection of logs.

/redfish/v1/Dell/Managers/<Manager-Id>/DellLCService/Actions/DellLCService.SupportAssistSetAutoCollectSchedule


HTTP Method	Required Privilege
POST	Login

NOTE A star (*) indicates a required parameter, else the parameter is optional.


Parameter	Type	Value	Description
DayOfMonth	string		'1-28 : Day of Month, L: Last day of the month 28,29,30 or 31 depending on the month. Default value is *, which indicates any value.'
DayOfWeek	string		'Valid values : single day of week. Mapping for day of week: Mon = 1, Tue = 2, Wed = 3, Thu = 4, Fri = 5, Sat = 6, Sun = 0 or 7(The default is first Sunday of the current month and if that is already past while applying then first Sunday of next month is the first time the job is scheduled). Default value is *, which indicates any value.'
Recurrence	string	Monthly, Quarterly, Weekly	Specifies the collection recurrence. If recurrence is Monthly or Quarterly, then either 1. DayofMonth or 2. WeekOfMonth and DayOfWeek must be passed.
Time	string		Hh:mm AM/PM (hour and minute of day to run).
WeekOfMonth	string		Means any value and this is the default value. Only one of the characters above. Default * (The default is first week of the month and if that is already past while applying then first week of next month is the first time the job is scheduled). 1 4 : Week Number, L : Means the last week of the month, A non * value is mutually exclusive with "DayOfMonth". If this value is non * then DayOfWeek is required.'


HTTP Status Code	Extended Information	Error Message Code
400	nil	LC001, RED073, SRV084