Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

PDF

Supported Action — ReInitiateAutoDiscovery

Description

The ReInitiateAutoDiscovery() method is used for reinitiating the discovery and handshake with static IP configuration. If the method successfully executes, iDRAC is in the static IP mode after the auto-discovery is initiated and thus, does not require DHCP setup. The static IP information for auto-discovery can be set either through the optional input parameters of this method or through the iDRAC attributes in the iDRAC Card Profile. After the successful auto-discovery initiation, if the IPAddress parameter has non-NULL value, the iDRAC IPv4 address is set to that parameter's value, otherwise the iDRAC IPv4 Address is set to the Address attribute in the IPv4 Information group in the iDRAC Card Profile. After the successful auto-discovery initiation, if the Mask parameter has a non-NULL value, the iDRAC IPv4 address net mask is set to that parameter's value, otherwise the iDRAC IPv4 address net mask is set to the to the Netmask attribute in the IPv4 Information group in the iDRAC Card Profile. After the successful auto-discovery initiation, if the Gateway parameter has non-NULL value, then the iDRAC IPv4 gateway address is set to that parameter's value, otherwise the iDRAC IPv4 gateway is set to the to the Gateway attribute in the IPv4 Information group in the iDRAC Card Profile. After the successful auto-discovery initiation, if the DNS parameter has non-NULL value, then the iDRAC IPv4 DNS address is set to that parameter's value, otherwise the iDRAC IPv4 DNS address is set to the to the DNS1 attribute in the IPv4 Information group in the iDRAC Card Profile. After the successful auto-discovery initiation, if the Domain parameter has non-NULL value, then the iDRAC domain name is set to that parameter's value, otherwise the iDRAC domain name is set to the to the DNSDomainName attribute in the NIC Information group in the iDRAC Card Profile.

URL

/redfish/v1/Dell/Managers/<Manager-Id>/DellLCService/Actions/DellLCService.ReInitiateAutoDiscovery

Supported HTTP Method and Privileges

HTTP Method Required Privilege
POST Login

Action Parameters

NOTE A star (*) indicates a required parameter, else the parameter is optional.
Parameter Type Value Description
DNS String Specifies the DNS IP address. If not specified, iDRAC static DNS IP address setting is used.
Domain String Specifies the domain name. If not specified, iDRAC static domain name setting is used.
Gateway String Specifies the gateway IP address. If not specified, iDRAC static gateway setting is used.
IPAddress String Specifies the static IP address. If not specified, iDRAC static IP address setting is used.
Mask String Specifies the subnet mask. If not specified, iDRAC static mask setting is used.
PerformAutoDiscovery String NextBoot, Now, 'Off' 'Specifies the auto discovery mode. "Off": Disables auto discovery, "Now": Enables and initiates auto discovery immediately, "NextBoot": Delays reconfiguration and discovery till next power cycle.'
ProvisioningServer String This property specifies the provisioning server addresses and ports used for auto discovery. If omitted, Lifecycle Controller gets the value from DHCP or DNS.

Supported Status Codes

HTTP Status Code Extended Information Error Message Code
400 nil LC008, LC009, LC002, LC065, LC004

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\