iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

Supported Action — CheckVDValues

Description

The CheckVDValues action is used to determine the possible sizes of Virtual disks and the default settings, proviced a RAID level and set of physical disks. The VDPropArray property is filled with Size and other values, so that the method is successfully executed. If the SpanDepth is not provided, a default value of 2 shall be used for RAID levels 10, 50, and 60.

NOTE For certain numbers of disks such as nine or fifteen, it may be necessary for the user to provide another SpanDepth.

URL

/redfish/v1/Dell/Systems/<ComputerSystem-Id>/DellRaidService/Actions/DellRaidService.CheckVDValues

Supported HTTP Method and Privileges


HTTP Method	Required Privilege
POST	Login

Supported Parameters

NOTE A star (*) indicates a required parameter, else the parameter is optional.


Parameter	Type	Value	Description
PDArray	Array of strings		Array of FQDDs where each identifies a physical drive.
Target	String		FQDD of the target device (Controller).
VDPropNameArrayIn	string	RAIDLevel, Size, SpanDepth, SpanLength, StartingLBA, T10PIStatus	Indexed array of VD property names. The property names can be Size, SpanDepth, SpanLength, RAIDLevel, StartingLBA or T10PIStatus. The values for the property needs to be provided in VDPropValueArrayIn in the same order.
VDPropValueArrayIn	Array of strings		Indexed array of VD property values for the respective VDPropNameArrayIn parameter.

Supported Status Codes


HTTP Status Code	Extended Information	Error Message Code
400		STOR003, STOR004, STOR006, STOR007, STOR009, STOR010, STOR011, STOR013, STOR017, STOR029, STOR030, STOR035, STOR037, STOR038, STOR043, STOR045, STOR046, STOR051, STOR052

Welcome

Welcome to Dell