Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Latitude 5340/Latitude 5340 2-in-1 Owner's Manual

PDF

Installing the fan

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the fan and provides a visual representation of the installation procedure.

Image: Installing the fan

Steps

  1. Align the screw holes on the fan with the screw holes on the system board.
  2. Replace the three screws (M2x3) to secure the fan to the palm-rest assembly.
  3. Connect the fan cable to the system board.
  4. Route the WLAN antenna cables through the routing guides on the fan.
  5. Route the coin-cell battery cable through the routing guide on the fan.
  6. Connect the sensor board cable to the system board.
  7. Adhere the mylar to the sensor board cable.

Next steps

  1. Install the WLAN card.
  2. Install the base cover.
  3. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\