Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Latitude 5340/Latitude 5340 2-in-1 Owner's Manual

PDF

Removing the eDP cable (laptop)

Prerequisites

CAUTION:The information in this section is intended for authorized service technicians only.
NOTE: The eDP cable removal procedure is applicable only for Latitude 5340 laptop and not for the 2-in-1 configuration.
  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the battery.
  4. Remove the display assembly.
  5. Remove the display bezel.
  6. Remove the display hinges.
  7. Remove the display panel.

About this task

The following images indicate the location of the eDP cable and provide a visual representation of the removal procedure.

Image: Removing the eDP cable

Steps

  1. Peel off the conductive tape that secures the camera cable in place.
  2. Open the latch and disconnect the camera cable from the connector on the camera module.
  3. Peel the tape that secures the eDP cable to the back cover.
  4. Remove the eDP cable from the back cover.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\