- Notes, cautions, and warnings
- Getting started
- New user setup
- Configure and provision a new storage system
- Using the PowerVault Manager interface
- System concepts
- About virtual and linear storage
- About disk groups
- About RAID levels
- About ADAPT
- About SSDs
- About SSD read cache
- About spares
- About pools
- About volumes and volume groups
- About volume cache options
- About thin provisioning
- About automated tiered storage
- About initiators, hosts, and host groups
- About volume mapping
- About operating with a single controller
- About snapshots
- About copying volumes
- About reconstruction
- About quick rebuild
- About performance statistics
- About firmware updates
- About managed logs
- About SupportAssist
- About CloudIQ
- About configuring DNS settings
- About replicating virtual volumes
- About the Full Disk Encryption feature
- About data protection with a single controller
- Working in the Home topic
- Guided setup
- Provisioning disk groups and pools
- Attaching hosts and volumes in the Host Setup wizard
- Overall system status
- Configuring system settings
- Managing scheduled tasks
- Working in the System topic
- Viewing system components
- Systems Settings panel
- Resetting host ports
- Rescanning disk channels
- Clearing disk metadata
- Updating firmware
- Changing FDE settings
- Configuring advanced settings
- Changing disk settings
- Changing system cache settings
- Configuring partner firmware update
- Configuring system utilities
- Using maintenance mode
- Restarting or shutting down controllers
- Working in the Hosts topic
- Working in the Pools topic
- Working in the Volumes topic
- Viewing volumes
- Creating a virtual volume
- Creating a linear volume
- Modifying a volume
- Copying a volume or snapshot
- Abort a volume copy
- Adding volumes to a volume group
- Removing volumes from a volume group
- Renaming a volume group
- Remove volume groups
- Rolling back a virtual volume
- Deleting volumes and snapshots
- Creating snapshots
- Resetting a snapshot
- Creating a replication set from the Volumes topic
- Initiating or scheduling a replication from the Volumes topic
- Manage replication schedules from the Volumes topic
- Working in the Mappings topic
- Working in the Replications topic
- About replicating virtual volumes in the Replications topic
- Replication prerequisites
- Replication process
- Creating a virtual pool for replication
- Setting up snapshot space management in the context of replication
- Replication and empty allocated pages
- Disaster recovery
- Accessing the data while keeping the replication set intact
- Accessing the data from the backup system as if it were the primary system
- Disaster recovery procedures
- Viewing replications
- Querying a peer connection
- Creating a peer connection
- Modifying a peer connection
- Deleting a peer connection
- Creating a replication set from the Replications topic
- Modifying a replication set
- Deleting a replication set
- Initiating or scheduling a replication from the Replications topic
- Stopping a replication
- Suspending a replication
- Resuming a replication
- Manage replication schedules from the Replications topic
- About replicating virtual volumes in the Replications topic
- Working in the Performance topic
- Working in the banner and footer
- Banner and footer overview
- Viewing system information
- Viewing certificate information
- Viewing connection information
- Viewing system date and time information
- Viewing user information
- Viewing health information
- Viewing event information
- Viewing capacity information
- Viewing host information
- Viewing tier information
- Viewing recent system activity
- Other management interfaces
- SNMP reference
- Using FTP and SFTP
- Using SMI-S
- Using SLP
- Administering a log-collection system
- Best practices
- System configuration limits
- Glossary of terms
Dell PowerVault ME4 Series Storage System Administrator’s Guide
Adding volumes to a volume group
You can add virtual volumes to a new or existing virtual volume group. All volumes in a volume group must be in the same pool.
To add a volume to a volume group, the volume must have the same mappings as all other members of the group. This means that the volume must be mapped with the same access and port settings to the same initiators, hosts, or host groups.
If the volume group is part of a replication set, you cannot add or remove volumes to or from it. If a volume group is being replicated, the maximum number of volumes that can exist in the group is 16.
NOTE:You cannot map LUN 0 for a SAS initiator. You can create a maximum of 1024 volumes, but because the supported LUN range is 1 through 1023, only 1023 volumes can be mapped using default mapping. Using explicit mapping, all volumes can be mapped.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\