DiscardedPkts
|
INT
|
Yes
|
Indicates the total number of discarded packets.
|
FCCRCErrorCount
|
INT
|
Yes
|
Indicates the number of FC frames with CRC errors.
|
FCOELinkFailures
|
INT
|
Yes
|
Indicates the number of FCoE/FIP login failures.
|
FCOEPktRxCount
|
INT
|
Yes
|
Indicates the number of good (FCS valid) packets received with the active FCoE MAC address of the partition.
|
FCOEPktTxCount
|
INT
|
Yes
|
Indicates the number of good (FCS valid) packets transmitted that passed L2 filtering by a specific MAC address.
|
FCOERxPktDroppedCount
|
INT
|
Yes
|
Indicates the number of receive packets with FCS errors.
|
FQDD
|
String
|
Yes
|
A string that contains the Fully Qualified Device Description (FQDD), which is a user-friendly name for the object.
|
LanFCSRxErrors
|
INT
|
Yes
|
Indicates the Lan FCS receive Errors.
|
LanUnicastPktRXCount
|
INT
|
Yes
|
Indicates the total number of Lan Unicast Packets Received.
|
LanUnicastPktTXCount
|
INT
|
Yes
|
Indicates the total number of Lan Unicast Packets Transmitted.
|
OSDriverState
|
String
|
Yes
|
Indicates operating system driver states.
|
PartitionLinkStatus
|
String
|
Yes
|
Indicates whether the partition link is up or down.
|
PartitionOSDriverState
|
String
|
Yes
|
Indicates operating system driver states of the partitions.
|
RDMARxTotalBytes
|
INT
|
Yes
|
Indicates the total number of RDMA bytes received.
|
RDMARxTotalPackets
|
INT
|
Yes
|
Indicates the total number of RDMA packets received.
|
RDMATotalProtectionErrors
|
INT
|
Yes
|
Indicates the total number of RDMA Protection errors.
|
RDMATotalProtocolErrors
|
INT
|
Yes
|
Indicates the total number of RDMA Protocol errors.
|
RDMATxTotalBytes
|
INT
|
Yes
|
Indicates the total number of RDMA bytes transmitted.
|
RDMATxTotalPackets
|
INT
|
Yes
|
Indicates the total number of RDMA packets transmitted.
|
RDMATxTotalReadReqPkts
|
INT
|
Yes
|
Indicates the total number of RDMA ReadRequest packets transmitted.
|
RDMATxTotalSendPkts
|
INT
|
Yes
|
Indicates the total number of RDMA Send packets transmitted.
|
RDMATxTotalWritePkts
|
INT
|
Yes
|
Indicates the total number of RDMA Write packets transmitted.
|
RXInputPowermW
|
Number
|
Yes
|
Indicates the RX input power value of Small Form Factor pluggable (SFP) Transceiver.
|
RxBroadcast
|
INT
|
Yes
|
Indicates the total number of good broadcast packets received.
|
RxBytes
|
INT
|
Yes
|
Indicates the total number of bytes received, including host and remote management pass through traffic. Remote management passthrough traffic is applicable to LOMs only.
|
RxErrorPktAlignmentErrors
|
INT
|
Yes
|
Indicates the total number of packets received with alignment errors.
|
RxErrorPktFCSErrors
|
INT
|
Yes
|
Indicates the total number of packets received with FCS errors.
|
RxFalseCarrierDetection
|
INT
|
Yes
|
Indicates the total number of false carrier errors received from PHY.
|
RxJabberPkt
|
INT
|
Yes
|
Indicates the total number of frames that are too long.
|
RxMutlicastPackets
|
INT
|
Yes
|
Indicates the total number of good multicast packets transmitted.
|
RxPauseXOFFFrames
|
INT
|
Yes
|
Indicates the flow control frames from the network to pause transmission.
|
RxPauseXONFrames
|
INT
|
Yes
|
Indicates the flow control frames from the network to resume transmission.
|
RxRuntPkt
|
INT
|
Yes
|
Indicates the total number of frames that are too short (< 64 bytes).
|
RxUnicastPackets
|
INT
|
Yes
|
Indicates the total number of good unicast packets transmitted.
|
StartStatisticTime
|
String
|
Yes
|
Indicates the measurement time for the first NIC statistics. The property is used with the StatisticTime property to calculate the duration over which the NIC statistics are gathered.
|
StatisticTime
|
String
|
Yes
|
Indicates the most recent measurement time for NIC statistics. The property is used with the StatisticStartTime property to calculate the duration over which the NIC statistics are gathered.
|
TXBiasCurrentmA
|
Number
|
Yes
|
Indicates the TX Bias current value of Small Form Factor pluggable (SFP) Transceiver.
|
TXOutputPowermW
|
Number
|
Yes
|
Indicates the TX output power value of Small Form Factor pluggable (SFP) Transceiver.
|
TemperatureCel
|
Number
|
Yes
|
Indicates the temperature value of Small Form Factor pluggable (SFP) Transceiver.
|
TemperatureStatus
|
String
|
Yes
|
Indicates the status of Temperature value limits.
|
TxBroadcast
|
INT
|
Yes
|
Indicates the total number of good broadcast packets transmitted.
|
TxBytes
|
INT
|
Yes
|
Indicates the total number of bytes transmitted, including host and remote management passthrough traffic. Remote management passthrough traffic is applicable to LOMs only.
|
TxErrorPktExcessiveCollision
|
INT
|
Yes
|
Indicates the number of times a single transmitted packet encountered more than 15 collisions.
|
TxErrorPktLateCollision
|
INT
|
Yes
|
Indicates the number of collisions that occurred after one slot time (defined by IEEE 802.3).
|
TxErrorPktMultipleCollision
|
INT
|
Yes
|
Indicates the number of times that a transmitted packet encountered 2-15 collisions.
|
TxErrorPktSingleCollision
|
INT
|
Yes
|
Indicates the number of times that a successfully transmitted packet encountered a single collision.
|
TxMutlicastPackets
|
INT
|
Yes
|
Indicates the total number of good multicast packets transmitted.
|
TxPauseXOFFFrames
|
INT
|
Yes
|
Indicates the number of XOFF packets transmitted to the network.
|
TxPauseXONFrames
|
INT
|
Yes
|
Indicates the number of XON packets transmitted to the network.
|
TxUnicastPackets
|
INT
|
Yes
|
Indicates the total number of good unicast packets transmitted.
|
VoltageStatus
|
String
|
Yes
|
Indicates the status of voltage value limits.
|
VoltageValueVolts
|
Number
|
Yes
|
Indicates the voltage value of Small Form Factor pluggable (SFP) Transceiver.
|