Dell Latitude 9410 Service Manual

Removing the base cover

1. Loosen the 10 captive screws that secure the base cover to the computer.
   
2. Pry the base cover along the edges from the top side [2] to separate the base cover from the computer [2].
   CAUTION: Do not pull on the base cover from the top side immediately after prying it open from the recesses as it can damage the base cover.

   
3. Pry along the left, right and bottom edges of the base.
4. Slide the base cover outwards before removing it off the computer and then lift the base cover off the computer.
   
5. Using the pull tab, disconnect the battery cable from the system board.
6. Turn your computer over and press the power button for 15 seconds to drain the flea power.