Dell Latitude 9410 Service Manual

Installing the heatsink

1. Align the screw holes on the heatsink [1] with the screw holes on the system board.
2. Replace the four (M1.6x2.5) screws [2] that secure the heatsink to the system board.
   
3. Place the heatsink shield on the heatsink.
   
4. Adhere the metal foils on the heatsink shield.
   
5. Adhere the camera and touch screen FPC cables on the heatsink shield [1].
6. Connect the camera and touch screen FPC cables [2] to the connector on the system board.
7. Adhere the Mylar sheet [3] on the system board.