Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Latitude 9410 Service Manual

PDF

Palmrest assembly

  1. Follow the procedure in before working inside your computer.
  2. Remove the SD memory card.
  3. Remove the base cover.
  4. Disconnect the battery cable.
  5. Remove the coin cell.
  6. Remove the SSD.
  7. Remove the WLAN card.
  8. Remove the WWAN card.
  9. Remove the fan.
  10. Remove the speakers.
  11. Remove the heatsink.
    NOTE: System board can be removed with heatsink assembly attached.
  12. Remove the display assembly.
  13. Remove the battery.
  14. Remove the system board.
  15. Remove the keyboard.
  1. After performing the preceding steps, you are left with palmrest assembly.
    Palmrest
  2. Transfer the post-requisite components onto the new palmrest assembly.
Details of the Power button with FPC
  1. WWAN antenna module with antenna cables and FPCs (for models shipped with a WWAN card)
  2. SmartCard reader with FFC (for models shipped with a SmartCard reader)
  3. LED board with FFC
  4. Touchpad with FPC
  5. Wireless antenna module with antenna cables
  6. NFC module with FPC (for models shipped with an NFC reader)
  7. USH daughter board with FPC (for models shipped with a USH daughter board)
  8. Fingerprint reader module with FPC (for models shipped with a Fingerprint reader)
  9. Power button with FPC
  1. Install the keyboard
  2. Install the system board
  3. Install the battery.
  4. Install the display assembly
  5. Install the heatsink
  6. Install the speaker.
  7. Install the fan.
  8. Install the WWAN card.
  9. Install the WLAN card.
  10. Install the SSD.
  11. Install the coin cell
  12. Connect the battery cable
  13. Install the base cover.
  14. Install the SIM card
  15. Install the SD memory card.
  16. Follow the procedure after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\