Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Latitude 9410 Service Manual

PDF

Installing the fan

For the system shipped with a WWAN card, there is an L-shaped bracket (P-sensor bracket) that covers the four WWAN LTE antenna cable connections to the system board. The screw that secures the bracket to the system also helps secure the fan to the system. Technicians must first remove the bracket before removing the fan and then reinstall the bracket after the fan is reinstalled.

  1. Slide the fan at an angle into its slot on the system board.
    WLAN card
  2. Replace the single (M2x2) screw [1] to secure the fan to the system board.
  3. Adhere the padded rubber gasket [2] on the fan case.
    WLAN card
  4. Align the screw holes on the WWAN P-sensor bracket [1] with the screw hole on the fan.
  5. Replace the single (M2x2) screw [2] to secure the WWAN P-sensor bracket to the fan.
    WLAN card
  6. Connect the fan cable [1] to the connector on the system board.
  7. Adhere the black tape [2] and the metal foil [3] partially covering the SSD shield.
    WLAN card
  8. Adhere the Mylar sheet on the system board.
    WLAN card
  1. Connect the battery cable
  2. Install the base cover.
  3. Install the SD memory card.
  4. Follow the procedure in after working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\