Dell Latitude 9410 Service Manual

Removing the heatsink

1. Partially peel off the Mylar sheet [1] from the system board.
2. Disconnect the camera and touch screen FPC cable [2] from the connector on the system board.
3. Peel off the camera and touch screen FPC cable from the heatsink shield [3].
   
4. Remove the metal foil from the heatsink shield.
   
5. Remove the heatsink shield from the system board.
   
6. Remove the four (M1.6x2.5) screws [1] that secure the heatsink on the system board.
7. Lift the heatsink [2] off the system board.