Dell Latitude 9410 Service Manual

Removing the battery

1. Peel off the tape [1] and unroute the wireless antennae cables from the routing guides on the battery [2].
   NOTE: The cables for the wireless antennas are routed over the plastic bracket at the top left corner and within the routing channels along the left and bottom side of the battery. As a result, technicians must be careful when unrouting the antenna cables from their routing guides while they are still attached to the wireless card. If there is difficulty in unrouting the antenna cables from their routing channels, remove the WLAN card from the computer to create space to unroute the cables.
   
2. Remove the single (M1.6x4.5) screw [1] in highlighted in red circle and four (M2x3) screws highlighted in yellow color that secure the battery to the chassis.
3. Lift and remove the battery off the computer [2].

   

   NOTE: A 6-cell battery has an extra M2x4 screw shown in green. Remove the screw before removing the battery from the computer.

   Table 1. Battery screw descriptionBattery screw description

   		Size	Amount
   4-cell battery	Yellow	M2x3L	5
   	Red	M1.6x4.5L	1
   6-cell battery	Green	M2x4L	1