Latitude 3590 Owner’s Manual

Installing the LCD Panel

1. Connect the LCD cable to its connector on the back side of the LCD panel.
2. Affix the adhesive sticker.
3. Place the LCD panel on the LCD back cover and align the LCD panel with the screw holders on the LCD back cover.
4. Replace the 4 M2x2 screws to secure the LCD panel to the LCD back cover.
5. Route the eDP cable through the routing channel and secure the cable to the display panel with an adhesive tape.
6. Install the:
   1. LCD bezel
   2. display assembly
   3. Installing the WWAN card
   4. Installing the WLAN card
   5. battery
   6. base cover
7. Follow the procedure in After working inside your computer