Latitude 3590 Owner’s Manual

Removing the touchpad

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. base cover
   2. battery
3. Remove the two M2x2 screws that secures the touchpad bracket to the system [1].
4. Lift the metal bracket from the system [2].
   
5. Peel off the adhesive tape that secures the touchpad panel [1].
6. Disconnect the touchpad cable and keyboard backlight cable from their respective connectors on the system board [2,3]
   
7. Remove the four M2x2 screws that secure the touchpad on the computer [1] and lift the touchpad from the system [2].