Latitude 3590 Owner’s Manual

Installing the touchpad

1. Place the touchpad into the slot on the computer and replace the four M2x2 screws to secure it to the system.
2. Connect the touchpad and keyboard backlight cables to their respective connectors on the system board.
3. Affix the adhesive tape to secure the touchpad to the system.
4. Align and place the metal bracket under the plastic hold down.
5. Replace the two M2x2 screws to secure the metal bracket to the touchpad.
6. Install the:
   1. battery
   2. base cover
7. Follow the procedure in After working inside your computer.