Latitude 3590 Owner’s Manual

Removing the hard disk drive

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. base cover
   2. battery
   3. Disconnect the battery cable from the connector on the system board.
3. To remove the hard disk drive (HDD):
   1. Disconnect the HDD cable from the system board .
      
   2. Remove the four M2.0x5.5 screws that secure the HDD to the palmrest [1].
   3. Lift the HDD from the computer [2].
   
4. Disconnect the HDD cable interposer.
   
5. Then, remove the M3xL3 screws to detach the bracket from the HDD.
   
6. Lift the bracket from the hard drive.