Latitude 3590 Owner’s Manual

Removing the eDP and camera cable

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. base cover
   2. battery
   3. WLAN card
   4. WWAN card
   5. display assembly
   6. LCD bezel
   7. LCD panel
3. Remove the adhesive tapes that secure the camera and the eDP cable [1].
4. Remove the screws securing the right bracket to the LCD back cover [2] and lift the bracket away from the LCD back cover [3].
5. Disconnect the camera cable from its connector on the LCD back cover [4].
   
6. Unroute the cable from the routing clips on the LCD back cover, release it from the adhesive tapes that secure the cable to back cover.