Dell ThinOS 2402 Administrator’s Guide

Configure the VMware broker connection

1. From the desktop menu, click System Setup, and then click Remote Connections.
   The Remote Connections dialog box is displayed.
2. In the Broker Setup tab, select VMware Horizon from the Select Broker Type drop-down list, and do the following:
   • Broker Server—Enter the IP address/Hostname/FQDN of the broker server.
   • Auto Connect List—Enter the name of the desktops that you want to launch automatically after logging in to the respective broker. You can enter multiple desktop names. Each desktop name is separated by semicolon, and is case-sensitive.
   • Security mode—Select the preferred security mode from the following options:
     • Full—Full Security requires an FQDN address with a domain certificate.
     • Warning—Warn Security requires an FQDN address with a self-signed certificate, or without any certificate. But the corresponding warning message is displayed for user to continue.
     • Low—Security allows an FQDN or IP address with or without a certificate.
   • Connection Protocol—From the drop-down list, select the type of protocol connection. By default, the option is set to Server Default.
     NOTE:The PCoIP only connection protocol is applicable only to PCoIP clients. If you do not install the Teradici PCoIP package, then the PCoIP protocol option is not available.

     The available options are:

     • Server default—Select this protocol connection to display the desktop with default protocol as configured in the VMware View Admin console, for each pool in the broker. If a desktop pool is configured with default protocol as RDP in the View Admin console, then only the RDP connection of the desktop is displayed in ThinOS after users sign in to the device.
     • All Supported—Select this protocol connection to display the desktop in all the available connections. This is applicable when a desktop pool is configured to allow users to select the protocol as yes. If the desktop is configured with default protocol as PCoIP and allow user to select protocol as no, then ThinOS only displays the desktop in the PCoIP connection.
     • RDP only—Select this protocol connection to display the desktop in RDP connection only. If a desktop pool is configured with default protocol as PCoIP in the View Admin console, and allow users to select the protocol as no, then this desktop is not displayed in ThinOS after user signs in to the device.
     • PCoIP only—This option is available only for PCoIP enabled clients. Select this protocol connection to display only the desktop in the PCoIP connection, for each pool in the broker. If a desktop pool is configured with default protocol as RDP in the View Admin console, and allow user to select the protocol as no, then this desktop is not displayed in ThinOS after user signs in to the device.
     • Blast only—VMware Blast display protocol can be used for remote applications and for remote desktops that use virtual machines or shared-session desktops on an RDS host. Select this protocol connection to display the desktop with the Blast protocol.
   • Log in anonymously using Unauthenticated Access—Select this check box to anonymously log in to the VMware session with application remoting.
3. Click OK to save the settings.