N/A
|
ICMP
|
N/A
|
None
|
OpenManage Enterprise appliance
|
Out
|
Managed device
|
Used to verify that the provided IP or FQDN for discovery is reachable from the appliance.
|
22
|
SSH
|
TCP
|
256-bit
|
Management station
|
In
|
OpenManage Enterprise appliance
|
Incoming network access is only required if FSD is used. The OpenManage Enterprise administrator must enable only when interacting with the Dell support staff.
|
25
|
SMTP
|
TCP
|
None
|
OpenManage Enterprise appliance
|
Out
|
Management station
|
Email alerts
|
53
|
DNS
|
UDP or TCP
|
None
|
OpenManage Enterprise appliance
|
Out
|
Management station
|
DNS queries
|
68 / 546 (IPv6)
|
DHCP
|
UDP or TCP
|
None
|
OpenManage Enterprise appliance
|
Out
|
Management station
|
Network configuration
|
80*
|
HTTP
|
TCP
|
None
|
Management station
|
In
|
OpenManage Enterprise appliance
|
The Web UI landing screen. All Web UI content is rerouted to port 443 (HTTPS).
|
123
|
NTP
|
TCP
|
None
|
OpenManage Enterprise appliance
|
Out
|
NTP Server
|
Time synchronization (if enabled)
|
137, 138, 139, 445
|
CIFS
1
|
UDP or TCP
|
None
|
iDRAC/ CMC
|
In
|
OpenManage Enterprise appliance
|
- This port is used to upload or download deployment templates.
- This port is used to upload TSR and diagnostic logs.
- This port is used to download firmware or driver DUPs.
- Emergency FSD process, if web UI is not available.
For more information, see Appliance Share in
Manage console settings.
|
OpenManage Enterprise appliance
|
Out
|
CIFS share
|
Import firmware or driver catalogs from CIFS share.
|
111, 2049 (default)
|
NFS
|
UDP or TCP
|
None
|
OpenManage Enterprise appliance
|
Out
|
External NFS share
|
- Download catalog and DUPs from the NFS share for firmware updates.
- Manual console upgrades
|
1622
|
SNMP
|
UDP
|
None
|
Management station
|
In or Out
|
OpenManage Enterprise appliance
|
Event reception through SNMP. Enable outgoing traffic on this port only if using the Trap forward policy.
|
443 (default)
|
HTTPS
|
TCP
|
128-bit SSL
|
Management station
|
In or Out
|
OpenManage Enterprise appliance
|
- Web UI
- This port is used to upload or download deployment templates.
- This port is used to upload TSR and diagnostic logs.
- This port is used to download firmware or driver DUPs.
- FSD process
- This port is used to download updates and warranty information from Dell.com. 256-bit encryption is allowed when communicating with the OpenManage Enterprise by using HTTPS for the web UI.
- Server-initiated discovery
- This port is used to download firmware or driver DUPs.
For more information, see Appliance Share in
Manage console settings.
|
514
|
Syslog
|
UDP
|
None
|
OpenManage Enterprise appliance
|
Out
|
Syslog server
|
This port is used to send alert and audit log information to the Syslog server.
|
3269
|
LDAPS
|
TCP
|
None
|
OpenManage Enterprise appliance
|
Out
|
Management station
|
AD or LDAP login for Global Catalog
|
636
|
LDAPS
|
TCP
|
None
|
OpenManage Enterprise appliance
|
Out
|
Management station
|
AD or LDAP login for domain controller
|