Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

OpenManage Enterprise 4.1.x User's Guide

PDF

Refresh compliance of the configuration compliance baselines

Configuration compliance is used to indicate the overall compliance status of the configuration baseline. The roll-up status can show critical or non-compliant even if a single device is non-compliant and all other associated devices have a compliant status.

About this task

The compliance status check of a compliance baseline is triggered automatically if changes are made to either the attributes of the baseline reference template or if there is any change to the configuration inventory of any of the baseline-associated devices.

The compliance status of a configuration compliance baseline is a roll-up compliance level of the devices attached to that configuration compliance baseline. The status of the device with least compliance (say, critical) is indicated as the status of the whole baseline.

The overall compliance summary of all the configuration baselines is represented on a donut chart located above the Baseline grid. The Compliance Last Run Date and Time is displayed below the chart.

Compliance status check on large baselines may take several minutes, however, you can click Refresh Compliance Summary to get an overall compliance summary of the devices on an as-needed basis while the large baseline compliance jobs are running.

NOTE:
  • When the configuration compliance is in 'Running' status, initiating new jobs that impact baselines, such as editing of a compliance template or baseline, is not allowed.
  • Clicking on the Refresh Compliance Summary only refreshes the overall compliance chart and not every individual baseline. To update individual baselines, trigger an edit baseline job:
    1. Select the baseline.
    2. Click on Edit.
    3. On the dialog box, click on Finish.

Steps

  1. Click Configuration > Configuration Compliance, the Configuration Compliance screen is displayed.
  2. Click Refresh Compliance Summary.

Results

The compliance refresh job (Load Summary of Compliance) is initiated and the overall compliance summary at that moment is displayed through the donut chart and the Compliance Last Run Time is updated.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\