PowerScale OneFS 9.8.0.0 Web Administration Guide

Add or remove an IP address range

You can add or remove an IP address range within IP address pool settings.

1. Click Cluster Management > Network Configuration > External Network.
2. Click View/Edit next to the IP address pool that you want to modify.
   The system displays the View Pool Details window.
3. Click Edit.
   The system displays the Edit Pool Details window.
4. To add a range, in the IP range area, enter a range of IP addresses you want assigned to the IP address pool in the fields provided.
   Specify the range in the following format: low IP address - high IP address
5. To add an additional range, click Add an IP range.
   The system provides fields in which you can enter the low and high IP addresses of the additional range.
6. To delete an IP address range, click Remove IP range next to the range you want to delete.
7. Click Save Changes.