PowerScale OneFS 9.8.0.0 Web Administration Guide

Modify zone settings

Modify S3 zone-specific settings for setting root-path for buckets in zone.

1. Click Protocols > Objects Storage (S3) .
2. Click the Zone settings tab.
3. In the Current access zone list, click the access zone whose settings you modify. By default System zone is selected.
   The details that are related to the bucket root path and base domain are displayed.
4. Modify the following fields:
   • Bucket root path: You can modify the bucket root path for any new bucket that is created.
     1. Click Browse. The Select a path to a file dialog box appears.
     2. Select the path on /ifs.
     3. Click Select. The updated bucket root path appears in the Bucket root path box.
   • Base domain: You can modify the base domain.
     NOTE:A base domain is used as part of the object address where the virtual host style addressing is used. As a result of setting the base domain, OneFS can understand which part of the address points out to the bucket. For example, if you are using an addressing scheme that includes the bucket, you can have addresses of the form: mybucket.mydomain.com. You need to tell OneFS that mydomain.com is the base domain so that it knows that mybucket is the bucket.
   • Use MD5 for Etag on upload: Select the check box to use MD5 for Etag or clear the check box if it is already selected.
   • Validate given Content-MD5: Select the check box to validate the given Content-MD5 or clear the check box if it is already selected.
   Click Revert changes to go back to previous settings. Revert changes is enabled only if any modifications are made.
5. Click Save Changes.
   Save changes is enabled only if you have modified the settings.
   The changes are saved, and the following message appears.

   Updated S3 zone settings.
   S3 zone settings has been updated successfully.