OptiPlex 7090 Ultra Service Manual

Installing device on offset VESA mount

1. Align the screw holes on the device with the screw holes on the offset VESA mount.
2. Install the four screws to secure the device to the offset VESA mount.
   
3. To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet.
4. Align the screw holes on the offset VESA mount with the screw holes on the monitor.
5. Install the four screw spacers and the screws to secure the offset VESA mount to the monitor.
   
6. Insert the hooks on the mounting bracket of the monitor arm stand into the slots on the offset VESA mount on the monitor.
7. Lower the monitor on the monitor arm stand until you hear a click.
   
8. To install the offset VESA mount on a Dell E-Series monitor:
   1. Align and install the four screws to secure the device to the offset VESA mount.
      
   2. Remove the VESA cover from the back of the monitor and secure the offset VESA mount along with the device to the monitor.
      

      

      NOTE While orienting the monitor horizontally, route the security lock cable to the right side of the device to avoid any impact to WLAN performance.