Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

OptiPlex 7090 Ultra Service Manual

PDF

Installing device on Wall Mount

Steps

  1. Full Function
    1. Press the release button to open the cable cover.
      Image 1
    2. Align the screw holes on the wall mount in the wall and mark them against the wall using a pencil.
      Image 2
    3. Drill the screw marks on the wall and insert the three screw anchors into the screw holes in the wall.
      Image 3
    4. Align the screw holes on the wall mount with the screw holes on the wall and install the three screws to secure the wall mount in the wall.
      Image 4
    5. Align the screw holes on the device with the screw holes on the wall mount bracket.
    6. Install the four screws to secure the device to the wall mount bracket.
      Image 5
    7. Insert the hooks on the mounting bracket of the wall mount into the slots on the wall mount bracket module.
    8. Align and insert the hooks on the wall mount bracket module into the slots on the wall mount until it clicks into place
      Image 6
    9. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet.
      Image 7
    10. To avoid any pinching or crimping of the cables while closing the stand cover, it is recommended that you route the cables as indicated in the image.
      NOTE All the cables and ports are used depending on the peripherals chosen and the configuration of the computer.
      Image 8
    11. Close the stand cover.
      Image 9
    12. Lock the device and the stand cover.
      Image 10
  2. Simple Function
    1. Align the screw holes on the wall mount in the wall and mark them using a pencil.
      Image 11
    2. Drill the screw marks on the wall and insert the two screws into the screw holes in the wall.
      Image 12
    3. Align the screw holes on the device with the screw holes on the wall mount bracket.
    4. Install the four screws to secure the device to the wall mount bracket.
      Image 13
    5. Connect the power, network, keyboard, mouse, and display cables to the device and to the power outlet.
      Image 14
    6. Align the screws on the wall with the retention clips on the wall mount bracket module.
    7. Mount the wall mount bracket module in the screws on the wall.
      Image 15
    8. Press the power button to turn on the device.
      Image 16

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\