OptiPlex 7090 Ultra Service Manual

Installing the M.2 2280 solid-state drive

For systems with solid-state drive in the hard drive bay will not support hard drive.

1. Align the notch on the M.2 2280 solid-state drive with the tab on the daughter board and slide the M.2 2280 solid-state drive at an angle into the slot.
2. Replace the (M2x3.5) screw to secure the M.2 2280 solid-state drive to the chassis.
3. Turn the solid-state drive cover and align the tabs on the solid-state cover with the slots on the chassis.
4. Align the screw hole on the solid-state drive cover with the screw hole on the chassis.
5. Replace the M2x3 screw to secure the solid-state drive cover to the chassis.