Dell EMC Solutions Enabler 9.2 SRDF Family CLI User Guide

When adding a director to a dynamic group, that director for the local array must be online and a physical link to one online director in the remote array must exist.

The group label or group number is required for modify operations.

Example - Modify a group using HYPERMAX OS

Arrays running HYPERMAX OS support multiple ports per director. You must specify both the director ID and the port number when modifying the local and remote ports. To add port 12 on local director 3h to SRDF group 38:

Example - Modify a group using Enginuity 5876

Arrays running Enginuity 5876 support a single port per director. Specify only the director ID when specifying the ports to add/remove to/from the SRDF group. For example:

Example - Modify a group in a mixed configuration

When one array in an SRDF configuration is running HYPERMAX OS, and one array is running Enginuity 5876, specify only the director ID on the array running 5876, and specify both the director ID and port number on the array running HYPERMAX OS. For example:

Example - Remove a director

To remove director 13a from the group dyngrp4 on the local array 6180: