Dell EMC Solutions Enabler 9.2 SRDF Family CLI User Guide

• When the MetroR1 is mapped to the host, the MetroR1 remains accessible to host
• If the DR Service state was Active HA or Active, the DR Service State is Active
• If the DR Service state was Degraded, and if the DR Link state was MetroR2 DR Offline, the DR Service State is Active

• When the MetroR2 is mapped to the host, the MetroR2 remains accessible to the host and becomes the MetroR1, while what was the MetroR1 before becomes inaccessible to the host and then becomes the MetroR2.
• If the DR Service State was Active HA, the DR Service State is Active
• If the DR Service State was Active, a –force is required, and the DR Service State is Inactive
• If the DR Service state was Degraded and the action results in DR being dropped, a –force is required, and the DR Service state is Inactive

symmdr –sid 702 –name metrodr1 suspend –metro –keep R1

A MetroDR Metro 'Suspend' operation is in progress
for 'metrodr1' Please wait...

    Update environment attributes..................................Started.
      MetroR1_ArrayID: 000197801702, Metro_RDFG  : 0115, DR_RDFG     : 0033
      MetroR2_ArrayID: 000197600056, Metro_RDFG  : 0119, DR_RDFG     : 0076
      DR_ArrayID     : 000197900048, MetroR1_RDFG: 0028, MetroR2_RDFG: 0044
      DR_Mode        : Asynchronous, MetroDR Devs: 6    
    Update environment attributes..................................Not Needed.
    Stop Data Repl (Host Access [MetroR1:Enable,MetroR2:Disable])..Started.
    Stop Data Repl (Host Access [MetroR1:Enable,MetroR2:Disable])..Done.
    Clear HA Data Repl (Metro,DR)..................................Started.
    Clear HA Data Repl (Metro,DR)..................................Done.

The MetroDR Metro 'Suspend' operation successfully executed
for 'metrodr1'.