Zu den Hauptinhalten
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Profitieren Sie von exklusiven Prämien und Rabatten für Mitglieder
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.

Dell PowerEdge R230 Owner's Manual

Removing a cabled hard drive from a hard drive carrier

Prerequisites

CAUTION: : Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

  1. Ensure that you follow the Safety instructions.
  2. Follow the procedure listed in Before working inside your system.
  3. Remove the cabled hard drive carrier.
  4. Keep the Phillips #2 screwdriver ready.

Steps

  1. Remove the screws from the side of the cabled hard drive carrier.
  2. Remove the hard drive from the hard drive carrier.
    Figure 1. Removing a cabled hard drive from a cabled hard drive carrier
    This figure shows removing a cabled hard drive from a cabled hard drive carrier.
    1. screw (4)
    2. cabled hard drive
    3. cabled hard drive carrier

Next steps

  1. Install the cabled hard drive in the hard drive carrier.
  2. Install the hard drive carrier into the slot.
  3. Follow the procedure listed in After working inside your system.

Diesen Inhalt bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie an, ob der Artikel hilfreich war.
  Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\