Dell PowerEdge R230 Owner's Manual

System board jumpers and connectors

Table 1. System board jumpers and connectorsItem 1 is the PCIe card connector 2. Item 2 is the internal USB connector 3.0. Item 3 is the processor socket. Item 4 is the iDRAC port card connector. Item 5 is the memory module socket. Item 6 is the 4–pin power connector 2. Item 7 is the chipset SAS connector. Item 8 is the optical drive SATA connector. Item 9 is the 8-pin power connector. Item 10 is the power supply unit connector. Item 11 is the password jumpers. Item 12 is cooling fan 4 connector. Item 13 is cooling fan 3 connector. Item 14 is the NVRAM password jumper. Item 15 is cooling fan 2 connector. Item 16 is the Trusted platform module connector. Item 17 is the intrusion switch connector. Item 18 is the backplane signal connector. Item 19 is the PERC LED connector. Item 20 is the hard drive/optical disk drive power connector. Item 21 is the front panel USB connector. Item 22 is cooling fan 1 connector. Item 23 is the control panel interface connector. Item 24 is the battery connector.
Item	Connector	Description
1	PCIE_G3_X8	PCIe card connector 2
2	INT_USB_3.0	Internal USB connector 3.0
3	CPU1	Processor socket
4	J_AMEA1	iDRAC port card connector
5	A3, A1, A4, A2	Memory module socket
6	PWR_CONN2	4–pin power connector 2
7	J_MINISAS1	Chipset SAS connector
8	J_SATA_CD	Optical drive SATA connector
9	SYS_PWR	8-pin power connector
10	PWR_EVENT	Power supply unit connector
11	PWD_EN	Password jumpers
12	FAN4	Cooling fan connector
13	FAN3	Cooling fan connector
14	NVRAM CLR	NVRAM password jumper
15	FAN2	Cooling fan connector
16	J_TPM1	Trusted platform module connector
17	R_INTRUSION	Intrusion switch connector
18	BP_SIG	Backplane signal connector
19	SAS_LED	PERC LED connector
20	HDD/ODD_PWR	Hard drive/optical disk drive power connector
21	FP_USB	Front panel USB connector
22	FAN1	Cooling fan connector
23	CTRL_PNL	Control panel interface connector
24	BATTERY	Battery connector