PowerScaleOneFS CLI Command Reference

Syntax

isi auth users create <name>
  [--enabled {yes | no}]
  [--expiry <timestamp>]
  [--email <string>]
  [--gecos <string>]
  [--home-directory <path>]
  [--password <string>]
  [--password-expires {yes | no}]
  [{--primary-group <name> | --primary-group-gid <integer> 
    | --primary-group-sid <string>}]
  [--prompt-password-change {yes | no}]
  [--shell <path>]
  [--uid <integer>]
  [--disable-when-inactive <boolean>
  [--zone <string>]
  [--provider <string>]
  [--set-password]
  [--verbose]
  [--force]

Options

<name>

Specifies the user name.

--enabled {yes | no}

Enables or disables the user.

{--expiry | -x} <timestamp>

Specifies the time at which the user account will expire, using the date format <YYYY>-<MM>-<DD> or the date/time format <YYYY>-<MM>-<DD>T<hh>:<mm>[:<ss>].

--email <string>

Specifies the email address of the user.

--gecos <string>

Specifies the values for the following Gecos field entries in the user's password file:

Full Name: 
Office Location: 
Office Phone: 
Home Phone: 
Other information: 

Values must be entered as a comma-separated list, and values that contain spaces must be enclosed in quotation marks. For example, the --gecos="Jane Doe",Seattle,555-5555,,"Temporary worker" option with these values results in the following entries:

Full Name: Jane Doe
Office Location: Seattle
Office Phone: 555-5555
Home Phone:
Other information: Temporary worker

--home-directory <path>

Specifies the path to the user's home directory.

--password <string>

Sets the user's password to the specified value. This option cannot be used with the --set-password option.

--password-expires {yes | no}

Specifies whether to allow the password to expire.

--primary-group <name>

Specifies the user's primary group by name.

--primary-group-gid <integer>

Specifies the user's primary group by GID.

--primary-group-sid <string>

Specifies the user's primary group by SID.

--prompt-password-change {yes | no}

Prompts the user to change the password during the next login.

--shell <path>

Specifies the path to the UNIX login shell.

--uid <integer>

Overrides automatic allocation of the UNIX user identifier (UID) with the specified value. Setting this option is not recommended.

--disable-when-inactive <boolean>

The user account will be disabled when it has been inactive beyond the value specified.

--zone <string>

Specifies the access zone in which to create the user.

--provider <string>

Specifies a local authentication provider in the specified access zone.

--set-password

Sets the password interactively. This option cannot be used with the --password option.

{--verbose | -v}

Displays the results of running the command.

{--force | -f}

Suppresses command-line prompts and messages.